3/4" Simpson MCR07512 Rebar Cutter Shake & Shingle Nails Ideal for use in high-moisture

Ideal for use in high-moisture and coastal environments

Predrilling not required in most applications

while the larger-diameter upper shank provides more shear resistance and successful installation

Finished with a yellow-zinc coating

3/4" Simpson MCR07512 Rebar Cutter Shake & Shingle Nails Ideal for use in high-moistureWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".